Tento nástroj 5-v-1 dělá vaši libelu zastaralou

Přesnost nové generace pro profesionály

Tento Nástroj 5-v-1 Dělá Vaši Libelu Zastaralou

Tesaři, pokrývači a ambiciózní kutilové po celém Česku si vybírají jediný individuálně kalibrovaný přesný nástroj — místo nošení pěti samostatných přístrojů.

Autor: Tomáš Novák

Odborná redakce · 12. května 2026

★★★★★ 4,9 · 1 024 recenzí

Show offer

1 The end of "eyeballing" measurements

Imagine: it’s 7:30 PM. You’re working in your workshop. And your measuring device… shows green digits, perfectly readable.

No flashlight. No reading glasses. No frustration trying to read the angle on the display.

The backlit LCD display makes this possible.

No strain. No bending over. No more relying on a barely visible bubble in your level.

93% of Luminis users confirm this: for the first time in years, values remain easily readable—even in a poorly lit basement. Many complete the entire job without once searching for their glasses.

2 No more dead batteries — always ready when you need it

No one will tell you this, but here is the truth: weak batteries don’t just sabotage your pace — they ruin accuracy.

When CR2032 batteries weaken, digital angle finders start to “drift.” The display fluctuates between 89.7° and 90.3°. Doubt sets in.

So you grab an analog level. But it doesn’t show exact degrees. You estimate. 42°? 43°? You cut — and the boards don’t fit together.

Professionals experience this constantly: faulty cuts under pressure. Wasting expensive material. Chronic frustration. And in the worst case — 200 euros worth of walnut wood turned into firewood.

3 You no longer need a third hand — the magnetic base holds like a rock

You know that frustrating moment. You need to measure the angle on the saw. But you only have two hands.

One hand holds the device. The other… what should it do? Stabilize the blade? Write down the value?

84% of Luminis owners confirm it: the device stays in place by itself. You no longer have to hold it. The magnetic base sticks directly to the saw blade, steel beams, or any metal surface.

Work with free hands. Both hands free for what really matters.

No slipping. No more "Can you hold this for me a moment?"

4 Accuracy 0.1° — no more guessing, no more "it should work"

Have you ever tried to measure the roof pitch with a simple level?

The bubble is "somewhere between the marks." Do you estimate: 42°? Maybe 43°?

You cut 8 boards based on that estimate. And then... gaps. Gaps everywhere.

With digital accuracy of 0.1°, estimates are a thing of the past. Luminis shows: 42.3°.

Not "around 42." Exactly 42.3 degrees.

You set the saw to 42.3°. You cut. The boards fit together to the millimeter.

Not by chance. By precision.

5 Built for construction sites — dustproof and splash-resistant (IP54)

Most digital tools are fragile. A bit of sawdust or a few drops of rain on the terrace, and the electronics give up. Not the Luminis X1.

IP54 certification: protected against dust accumulation and splashing water.

Robust casing: withstands a tough day on the construction site or in a dusty workshop.

Durability: it’s not an office toy, but a tool for those who really get to work.

91% of users say: they no longer fear leaving the device openly in the workshop. It is durable enough for the most demanding everyday use.

6 Double laser for perfect alignment — right on the first try

Hanging pictures. A wall with 9 frames. All must be perfectly aligned.

With traditional tools: pencil, level, measuring again, eraser, new markings. After 30 minutes, the first picture is hanging.

With the Luminis double laser beam: you project the laser onto the wall. You align all the frames along the line. Done.

Sharp, invisible lines. No more pencil marks. No more arguing with your partner about whether "it's hanging straight or not."

Laser lines show the perfect horizontal. Objectively. No discussion.

7 5-in-1 Tool — replaces half of your toolbox

Previously you needed:

- Digital protractor (for saw adjustment)
- Level (for horizontal work)
- Inclinometer (for roof slopes)
- Laser level (for alignment)
- Protractor (for blade adjustment)

5 separate devices. All take up space. All have their own batteries (which, as if on purpose, all run out at the same time).

Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Digital protractor? ✓
Level? ✓
Inclinometer? ✓
Laser level? ✓
Protractor? ✓

All in a single tool that fits in your pocket.

Now you have two options:

Option 1: Continue as you have been.
With unreadable displays. Dead batteries. Faulty cuts that cost a lot. And nerves every time the project doesn’t look the way you imagined.

Option 2: Invest in a tool that will change the way you work.
A tool you’ll want to use every day. One that protects your eyes—even in poor lighting. One that is always ready to use. One that will help you regain the precision you expect from yourself.

4,9 (1 024)

Luminis X1™ — Precise 5-in-1 Laser Tool

Omezená nabídka

~~1,599 CZK~~939 CZK ^-41%

Protractor, level, and cross laser in one — precise results within seconds.

Professional accuracy 0.1°

Individually tested and pre-calibrated

Double laser on both sides

Most popular choice

-30%

One piece

~~1,599 CZK~~

943 CZK

-38%

Pack of 2 pcs

~~3,198 CZK~~

1,733 CZK

-46%

Pack of 3 pcs

~~4,797 CZK~~

2,355 CZK

In stock — delivery within 4 to 6 business days

Title

How accurate is the measurement?

The Luminis X1 displays slopes and angles in real time with an accuracy of 0.1°.

You can easily calibrate the device yourself if needed to maintain accurate results for a long time.

You can immediately see if everything is perfectly aligned — even before you screw or mount anything.

What can I use it for?

Ideal for everyday use and for the workshop:

hanging pictures, assembling shelves, leveling furniture, adjusting machines, or preparing wood.

Suitable for DIY enthusiasts as well as experienced users.

How fast is the delivery?

Delivery within 3-5 business days. Orders are handed over to the shipping service within 24 hours.

How does the return process work?

You have 30 days to try the product.

If it doesn't suit you, you can easily return it — risk-free.