Dette 5-i-1 Værktøj Knuser Dit Nuværende Vaterpas

Præcisionsgennembrud for Håndværkere

Dette 5-i-1 Værktøj Knuser Dit Nuværende Vaterpas

Tømrere, tagdækkere og ambitiøse gør-det-selv-entusiaster i hele Danmark skifter til ét enkelt, individuelt kalibreret præcisionsværktøj — i stedet for at slæbe fem separate enheder med sig.

Af Mads Jensen

Håndværker-Redaktionen · 9. maj 2026

★★★★★ 4,9 · 1.024 anmeldelser

Direct to the offer

1 The conclusion of the "eyewitness lottery"

Imagine: the time is 7:30 PM. You are working in your workshop. And your measuring instrument... shows clear, green numbers. Perfectly readable.

No flashlight. No reading glasses. No frustration when reading the angle measurement.

The illuminated LCD display makes this possible.

No strain. No squinting. No dependence on the almost invisible bubble in your level.

93% of Luminis users report: target values can for the first time in years be read effortlessly even in poorly lit basements. Many work through an entire project – without ever searching for their reading glasses.

2 No more flat batteries – always ready to use when you need it

No one will tell you this, but here is the truth: constantly dead batteries not only sabotage your workflow – they ruin precision.

When CR2032 batteries get weak, digital angle gauges start to "drift." The display flickers between 89.7° and 90.3°. You become uncertain.

So you grab the analog level. But it doesn’t show precise degrees. You estimate. 42 degrees? 43 degrees? You cut – and the boards don’t fit.

Craftsmen see this all the time: stress-induced miscuts. Expensive material waste. Chronic frustration. And in the worst case – 200 euros worth of walnut wood wasted as firewood.

3 No more need for a third hand – magnetic base holder locks firmly in place

You know that frustrating moment. You need to measure an angle on the saw blade. But you only have two hands.

One hand holds the measuring instrument. The other... should do what? Stabilize the saw blade? Note the value?

84% of Luminis owners report: the measuring instrument stays in place by itself. You don’t need to hold it. The magnetic base attaches directly to the saw blade, steel beams, any metal surface.

Hands-free work. Both hands free for important tasks.

No slipping. No "Can you just hold this for a moment?"

4 0.1° accuracy – no guessing, no more "should fit"

Have you ever tried to measure a roof pitch with a level?

The bubble is "somewhere between the lines." You estimate: 42 degrees? Maybe 43?

You cut 8 boards based on this estimate. And then... gaps. Gaps everywhere.

With 0.1° digital accuracy, guessing is over. Luminis shows: 42.3°

Not "about 42." But exactly 42.3 degrees.

You set your saw to 42.3°. You cut. The boards fit to the millimeter.

Not by luck. But by precision.

5 Built for the construction site – dust and waterproof (IP67)

Most digital tools are delicate. A bit of sawdust or a few raindrops on the terrace, and the electronics give up. Not the Luminis X1.

IP54 certified: it is protected against dust deposits and splashing water.

Robust casing: it also survives a tough day on the construction site or in a dusty carpentry workshop.

Durability: it’s not a desk toy, but a tool for people who really get to work.

91% of users say: they are no longer afraid to leave the device out in the workshop. It’s tough enough for the hard everyday life.

6 Double laser for perfect alignment – the first time

Hang up pictures. A photo gallery with 9 frames. All must hang perfectly straight.

With normal tools: pencil, level, measuring again, eraser, redraw. 30 minutes later, the first picture is hung.

With Luminis' double laser lines: project the laser on the wall. Adjust all pictures according to the line. Done.

Clean, invisible lines. No pencil marks. No arguments with your partner about "whether it’s hanging straight or not."

The laser lines show the perfect horizontal. Objectively. Unambiguously.

7 5-in-1 tool – replaces half of the toolbox

Previously, you needed:

- A digital angle finder (for saw settings)
- A spirit level (for horizontal work)
- An inclinometer (for roof slopes)
- A laser level (for adjustments)
- A goniometer (for saw blade settings)

That’s 5 separate devices. All take up space. All have their own batteries (which, of course, all run out at the same time).

The Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Angle finder? ✓
Spirit level? ✓
Inclinometer? ✓
Laser level? ✓
Goniometer? ✓

All in one device that fits in your pocket.

You now have two options:

Option 1: You continue as before.
With unreadable displays. Flat batteries. Expensive errors. You get frustrated every time a project doesn’t turn out the way you imagined.

Option 2: You invest in a tool that transforms your work.
A tool you want to use every day. That eases the strain on your eyes – even in poor lighting conditions. That is always ready to use. That helps you work again with the precision you expect from yourself.

4,9 (1.024)

Luminis X1™ 5-in-1 laser precision tool

Tidsbegrænset tilbud

~~479 kr~~ 279 kr ^-30%

Angle meter, spirit level, and cross laser in one – precise results in seconds.

Professional accuracy of 0.1°

Individually tested and pre-calibrated

Double laser on both sides

Most chosen

-30%

Single unit

~~479 SEK~~

279 SEK

-38%

Double pack

~~949 SEK~~

522 SEK

-46%

Triple pack

~~1,449 kr~~

709 SEK

In stock: delivery time 4-6 business days

Title

How accurate is the measurement?

The Luminis X1 displays slopes and angles in real time with an accuracy of 0.1°.

The device can easily be calibrated as needed to ensure consistently precise results.

This way, you can immediately see if everything is precisely aligned before anything is screwed or mounted.

What can I use it for?

Ideal for typical everyday and workshop uses:

Hang pictures, install shelves, adjust furniture, set up machines, or prepare woodworking.

Suitable for both DIY enthusiasts and experienced users.

How fast is the delivery?

Delivery within 3-5 business days. We hand over orders to our shipping partner within 24 hours.

How does the return process work?

You have 30 days to test the product.

If it still doesn't suit you, you can easily return it – risk-free.