Tämä 5-in-1 työkalu tekee nykyisestä vesivaa'astasi tarpeettoman

Tarkkuusläpimurto ammattilaisille

Tämä 5-in-1 Työkalu Tekee Nykyisestä Vesivaa'astasi Tarpeettoman

Kirvesmiehet, kattoasentajat ja kunnianhimoiset tee-se-itse-harrastajat ympäri Suomea siirtyvät yhteen yksittäin kalibroituun tarkkuustyökaluun — sen sijaan että kantelisivat viittä erillistä laitetta mukanaan.

Markus Heinonen

Käsityöläiset-toimitus · 9. toukokuuta 2026

★★★★★ 4,9 · 1.024 arvostelua

Go directly to the offer

1 End of the rough estimate drawing

Imagine: it's 7:30 PM. You're working in your workshop. And your meter... shows clear, green numbers. Perfectly readable.

No flashlight. No reading glasses. No frustration reading the angle measurement.

The illuminated LCD display makes this possible.

No straining. No squinting. No relying on your level's barely visible bubble.

93% of Luminis users report: measurement values are readable without problems for the first time in years, even in poorly lit basements. Many work through the entire project without once reaching for their reading glasses.

2 No more dead batteries – always ready to use when you need them

No one tells you this, but here’s the truth: constantly dead batteries don’t just sabotage your workflow – they destroy accuracy.

When CR2032 batteries weaken, digital angle meters start to "drift." The display swings between 89.7° and 90.3°. Uncertainty grows.

Then you grab an analog level. But it doesn’t show precise degrees. You guess. 42 degrees? 43 degrees? You saw – and the boards don’t fit.

Professionals see this all the time: stress-induced wrong cuts. Expensive material waste. Chronic frustration. And in the worst case – €200 worth of walnut wood wasted as firewood.

3 No need for a third hand anymore – the magnetic base holds firmly in place

You know this frustrating moment. You need to measure the angle of the saw blade. But you only have two hands.

One hand holds the meter. The other... what should it do? Stabilize the saw blade? Write down the value?

84% of Luminis owners say: the meter stays in place by itself. You don’t have to hold it. The magnetic base sticks directly to the saw blade, steel beams, and every metal surface.

Hands-free working. Both hands free for important tasks.

No slipping. No "Can you hold this for a moment?"

4 0.1° accuracy – no more guessing, no more "should fit"

Have you ever tried to measure the slope of a roof with a spirit level?

The bubble is "somewhere between the lines." You guess: 42 degrees? Maybe 43?

You saw 8 boards based on this guess. And then... gaps. Gaps everywhere.

Guessing ends with 0.1° digital accuracy. Luminis shows: 42.3°

Not "about 42." But exactly 42.3 degrees.

You set your saw to 42.3°. You cut. The boards fit with millimeter precision.

Not by luck. But thanks to accuracy.

5 Built for the construction site – protected against dust and water (IP67)

Most digital tools are sensitive. A bit of sawdust or a few raindrops on the terrace and the electronics give in. Not with the Lumini X1.

IP54 certified: protected against dust accumulation and splashing water.

Durable casing: it can handle a tough day on the construction site or in a dusty woodworking shop.

Longevity: it’s not a toy for the table, but a tool for people who really get to work.

91% of users say: they no longer fear leaving the device out in the workshop. It’s durable enough for tough everyday use.

6 Dual laser for perfect alignment – right the first time

Hanging paintings. A gallery of nine frames. All must be perfectly straight.

With ordinary tools: pencil, spirit level, re-measuring, eraser, redrawing. Thirty minutes later, the first painting is in place.

With Lumini's dual laser lines: project the laser onto the wall. Align all the paintings to the line. Done.

Neat, invisible lines. No pencil marks. No arguments with your partner about whether "it's straight or not."

Laser lines show a perfectly horizontal line. Objectively. Unambiguously.

7 5-in-1 tool – replaces half of the toolbox

Previously you needed:

- A digital angle meter (for saw adjustments)
- A spirit level (for horizontal work)
- A slope meter (for roof slopes)
- A laser level (for alignments)
- A goniometer (for saw blade adjustments)

That’s 5 separate devices. All take up space. Each has its own batteries (which, of course, all run out at the same time).

The Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Angle meter? ✓
Spirit level? ✓
Slope meter? ✓
Laser level? ✓
Goniometer? ✓

All in one device that fits in your pocket.

You now have two options:

Option 1: Continue as before.
With unreadable screens. Dead batteries. Expensive faulty cuts. Getting frustrated every time the project doesn’t turn out as you imagined.

Option 2: Invest in a tool that will change the way you work.
A tool you want to use every day. One that eases your eyes – even in poor lighting conditions. One that is always ready to use. One that helps you work again with the precision you expect from yourself.

4,9 (1.024)

Luminis X1™ 5-in-1 laser precision tool

Määräaikainen tarjous

~~€64,99~~ €37,95 ^-30%

Angle meter, spirit level, and cross laser combined – precise results in seconds.

Professional-grade 0.1° accuracy

Individually tested and pre-calibrated

Double-sided dual laser

Most popular

-30%

Single device

~~€64,95~~

$78.00

-38%

Two-pack

~~€129.90~~

€69,90

-46%

Three-pack

~~€194.97~~

€94,95

In stock: delivery time 4–6 business days

Title

How accurate is the measurement?

The Luminis X1 displays tilts and angles in real time with an accuracy of 0.1°.

The device can be easily self-calibrated if needed to ensure permanently accurate results.

You can immediately see if everything is perfectly aligned – before anything is screwed or fixed in place.

What can I use it for?

Ideal for typical everyday and workshop uses:

Hanging pictures, installing shelves, aligning furniture, adjusting machines, or preparing woodworking tasks.

Suitable for both DIY enthusiasts and experienced users.

How quickly does the delivery take place?

Delivery takes place within 3–5 business days. We hand over orders to the shipping service within 24 hours.

How does the return process work?

You have 30 days to test the product.

If the product does not suit you, you can return it easily – without any risk.