Cet outil 5-en-1 rend votre niveau à bulle actuel obsolète

Précision nouvelle génération pour les pros

Cet Outil 5-en-1 Rend Votre Niveau À Bulle Obsolète

Charpentiers, couvreurs et bricoleurs ambitieux partout en France adoptent un seul outil de précision calibré individuellement — au lieu de trimballer cinq appareils séparés.

Par Marc Dubois

Rédaction Métier · 11 mai 2026

★★★★★ 4,9 · 1 024 avis

See the offer now

1 The end of the "guesstimate"

Imagine: it is 7:30 PM. You are working in your workshop. And your measuring instrument... displays green numbers, perfectly readable.

No flashlight. No reading glasses. No frustration trying to read the displayed angle.

The backlit LCD screen makes exactly that possible.

No effort. No contortions. No need to rely on the barely visible bubble of your level.

93% of Luminis users confirm it: for the first time in years, the values remain easily readable—even in a poorly lit basement. Many complete an entire job without once searching for their glasses.

2 No more dead batteries — always ready when you need them

No one tells you this, but here’s the truth: weak batteries don’t just sabotage your pace — they destroy accuracy.

When CR2032 batteries run low, digital goniometers start to “drift.” The display fluctuates between 89.7° and 90.3°. Doubt sets in.

So you grab the analog level. But it doesn’t show exact degrees. You estimate. 42°? 43°? You cut — and the boards don’t fit.

Professionals notice this all the time: failed cuts under stress. Waste of expensive materials. Chronic frustration. And in the worst case — 200 euros worth of walnut turned into firewood.

3 No need for a third hand — the magnetic base holds like a rock

You know that frustrating moment. You need to measure an angle on the saw blade. But you only have two hands.

One hand holds the tool. The other… what should it do? Stabilize the blade? Note the value?

84% of Luminis owners report: the tool stays in place by itself. No need to hold it anymore. The magnetic base sticks directly to the saw blade, steel beams, any metal surface.

Hands-free work. Both hands available for the tasks that matter.

No slipping. No more "Can you hold this for two seconds?"

4 0.1° precision — no more approximations, no more "that should be fine"

Have you ever tried to measure the slope of a roof with a simple level?

The bubble is "somewhere between the marks." You estimate: 42°? Maybe 43°?

You cut 8 boards based on that estimate. And then... gaps. Gaps everywhere.

With a digital accuracy of 0.1°, approximation is a thing of the past. The Luminis displays: 42.3°.

Not "about 42." Exactly 42.3 degrees.

You set your saw to 42.3°. You cut. The boards fit to the millimeter.

Not by chance. By precision.

5 Designed for the job site — dustproof and splash-resistant (IP54)

Most digital tools are fragile. A bit of sawdust or a few drops of rain on the terrace, and the electronics give out. Not the Luminis X1.

IP54 certified: protected against dust accumulation and water splashes.

Sturdy casing: it can handle a tough day on the construction site or in a dusty workshop.

Durability: this is not a desk toy, but a tool for those who really get their hands dirty.

91% of users say they no longer fear leaving the device open in the workshop. It is robust enough for the most demanding daily use.

6 Double laser for perfect alignment — on the first try

Hanging frames. A wall with 9 paintings. All must be perfectly aligned.

With classic tools: pencil, level, re-measure, eraser, new marking. 30 minutes later, the first frame is hung.

With the Luminis dual laser beam: project the laser onto the wall. Align all the frames on the line. Done.

Sharp, invisible lines. No more pencil marks. No more arguments with your partner about "whether it's straight or not."

The laser lines show the perfect horizontal. Objectively. Without ambiguity.

7 5-in-1 Tool — replaces half of your toolbox

Before, you needed:

- A digital protractor (for saw adjustments)
- A spirit level (for horizontal work)
- An inclinometer (for roof slopes)
- A laser level (for alignments)
- A bevel protractor (for blade settings)

That’s 5 separate devices. All take up space. All have their own batteries (which, as luck would have it, run out at the same time).

The Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Protractor? ✓
Spirit level? ✓
Inclinometer? ✓
Laser level? ✓
Bevel protractor? ✓

All in one tool that fits in your pocket.

You now have two options:

Option 1: You continue as before.
With unreadable screens. Dead batteries. Failed cuts that cost a lot. And frustration every time a project doesn’t turn out the way you envisioned.

Option 2: You invest in a tool that changes the way you work.
A tool you’ll want to use every day. That protects your eyes—even in poor lighting. That’s always ready to serve. That helps you regain the precision you expect from yourself.

4,9 (1.024)

Luminis X1™ — 5-in-1 Laser Precision Tool

Offre limitée

~~€64,99~~ €37,95 ^-30%

Protractor, bubble level & cross laser combined — precise results in seconds.

Professional precision of 0.1°

Individually tested & pre-calibrated

Double laser on both sides

The most chosen

-30%

Unique device

~~€64,95~~

$78.00

-38%

Duo pack

~~€129.90~~

€69,90

-46%

Trio pack

~~€194.97~~

€94,95

In stock — delivery within 4 to 6 business days

Title

What is the accuracy of the measurement?

The Luminis X1 displays inclinations and angles in real time with an accuracy of 0.1°.

The device can be easily recalibrated by yourself if needed, to ensure accurate results over time.

You can immediately see if everything is perfectly aligned — even before screwing or assembling anything.

What can I use it for?

Ideal for everyday use as well as for the workshop:

hanging frames, assembling shelves, aligning furniture, adjusting machines, or preparing wood.

Suitable for both DIY enthusiasts and experienced users.

How fast is the delivery?

Shipping within 3-5 business days. We hand over orders to our shipping service within 24 hours.

How does the return process work?

You have 30 days to test the product.

If it does not suit you, you can easily return it — risk-free.