Questo strumento 5-in-1 rende obsoleta la tua livella a bolla

Precisione di nuova generazione per i professionisti

Questo Strumento 5-in-1 Rende Obsoleta La Tua Livella A Bolla

Falegnami, carpentieri e appassionati del fai-da-te in tutta Italia stanno scegliendo un unico strumento di precisione calibrato individualmente — invece di portarsi dietro cinque dispositivi separati.

Di Marco Bianchi

Redazione Tecnica · 12 maggio 2026

★★★★★ 4,9 · 1.024 recensioni

See the offer now

1 The end of "by eye"

Imagine: it's 7:30 PM. You're working in the workshop. And your measuring tool... shows green numbers, perfectly readable.

No flashlight. No reading glasses. No frustration in reading the angle on the display.

The backlit LCD screen makes exactly this possible.

No effort. No twisting. No more relying on the barely visible bubble of your level.

93% of Luminis users confirm it: for the first time in years, the values remain easily readable—even in a dimly lit basement. Many complete an entire job site without needing to look for their glasses even once.

2 No more dead batteries — always ready when you need it

No one tells you this, but here’s the truth: weak batteries don’t just sabotage your rhythm — they destroy accuracy.

When CR2032 batteries run low, digital angle finders start to “drift.” The display swings between 89.7° and 90.3°. Doubt creeps in.

So you grab the analog level. But it doesn’t show exact degrees. You estimate. 42°? 43°? You cut — and the boards don’t fit.

Professionals experience this all the time: wrong cuts under stress. Expensive materials wasted. Chronic frustration. And in the worst case — €200 worth of walnut turned into firewood.

3 No longer need a third hand — the magnetic base holds like a rock

You know that frustrating moment. You need to measure an angle on the saw blade. But you only have two hands.

One hand holds the tool. The other… what should it do? Stabilize the blade? Write down the measurement?

84% of Luminis owners confirm it: the tool stays in place by itself. You no longer need to hold it. The magnetic base sticks directly to the saw blade, steel beams, or any metal surface.

Hands-free work. Both hands available for what really matters.

No more slipping. No more "Can you hold this for a second?"

4 0.1° Precision — no more approximations, no more "it should work"

Have you ever tried to measure the slope of a roof with a simple level?

The bubble is "somewhere between the marks." You estimate: 42°? Maybe 43°?

You cut 8 boards based on that estimate. And then... gaps. Gaps everywhere.

With a digital accuracy of 0.1°, approximation is a thing of the past. The Luminis shows: 42.3°.

Not "about 42." Exactly 42.3 degrees.

You set the saw to 42.3°. You cut. The boards fit perfectly.

Not by luck. By precision.

5 Built for the construction site — resistant to dust and water splashes (IP54)

Most digital tools are fragile. A bit of sawdust or a few drops of rain on the terrace, and the electronics fail. Not the Luminis X1.

IP54 certified: protected against dust accumulation and water splashes.

Sturdy casing: withstands a tough day on the construction site or in a dusty workshop.

Durability: it’s not a desk toy, but a tool for those who really get their hands dirty.

91% of users confirm it: they are no longer afraid to leave the device open in the workshop. It’s robust enough for the most demanding daily use.

6 Double laser for perfect alignment — on the first try

Hanging pictures. A wall with 9 frames. All must be perfectly aligned.

With traditional tools: pencil, level, re-measuring, eraser, new mark. 30 minutes later, the first frame is hung.

With the Luminis double laser beam: you project the laser on the wall. You align all the frames on the line. Done.

Sharp, invisible lines. No more pencil marks. No more arguments with your partner about "whether it's straight or not."

The laser lines show the perfect horizontal. Objectively. Without ambiguity.

7 5-in-1 Tool — replaces half of your toolbox

Before, you needed:

- A digital protractor (for saw adjustments)
- A spirit level (for horizontal work)
- An inclinometer (for roof slopes)
- A laser level (for alignments)
- A dial protractor (for blade adjustments)

5 separate devices. All take up space. All have their own batteries (which, coincidentally, run out all at once).

The Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Digital protractor? ✓
Spirit level? ✓
Inclinometer? ✓
Laser level? ✓
Dial protractor? ✓

All in one tool that fits in your pocket.

Now you have two options:

Option 1: Continue as before.
With unreadable displays. Dead batteries. Wrong cuts that cost you dearly. And the frustration every time a project doesn’t look like what you had in mind.

Option 2: Invest in a tool that changes the way you work.
A tool you’ll want to use every day. That saves your eyes—even in low light. That’s always ready to use. That helps you regain the precision you expect from yourself.

4,9 (1.024)

Luminis X1™ — 5-in-1 Laser Precision Tool

Offerta limitata

~~€64,99~~ €37,95 ^-30%

Protractor, bubble level, and cross laser in one — precise results in seconds.

Professional precision of 0.1°

Individually tested and pre-calibrated

Double laser on both sides

The most chosen

-30%

Single device

~~€64,95~~

$78.00

-38%

Double pack

~~€129.90~~

€69,90

-46%

Triple pack

~~€194.97~~

€94,95

Available — delivery in 4-6 business days

Title

How accurate is the measurement?

The Luminis X1 displays inclinations and angles in real time with an accuracy of 0.1°.

The device can be easily recalibrated by yourself when needed, ensuring accurate results over time.

See immediately if everything is perfectly aligned — even before screwing or mounting anything.

What can I use it for?

Ideal for both everyday use and the workshop:

hanging pictures, installing shelves, aligning furniture, adjusting machines, or preparing wood.

Suitable for both DIY enthusiasts and experienced users.

How fast is the shipping?

Shipping within 3-5 business days. We hand over orders to our courier within 24 hours.

How does the return process work?

You have 30 days to try the product.

If you are not satisfied, you can easily return it — risk-free.