Dit 5-in-1 gereedschap maakt jouw huidige waterpas overbodig

Precisiedoorbraak voor vakmensen

Dit 5-in-1 Gereedschap Maakt Jouw Huidige Waterpas Overbodig

Timmerlieden, dakdekkers en ambitieuze doe-het-zelvers in heel Nederland stappen over op één enkel, individueel gekalibreerd precisietool — in plaats van vijf losse apparaten mee te sjouwen.

Door Mark Hendriks

Vakmedia-Redactie · 09 mei 2026

★★★★★ 4,9 · 1.024 beoordelingen

Go directly to the offer

1 The end of "guessing by eye"

Imagine: it's 7:30 PM. You're working in your workshop. And your measuring instrument... shows clear, green numbers. Perfectly readable.

No flashlight. No reading glasses. No frustration when reading the degree display.

The illuminated LCD display makes exactly that possible.

No effort. No squinting. No relying on the barely visible bubble in your level.

93% of Luminis users report: for the first time in years, the measurements can be read effortlessly even in poorly lit basements. Many work through an entire project – without once having to look for their reading glasses.

2 No more empty batteries – always ready to use whenever you need it

No one will tell you this, but here is the truth: dead batteries don’t just sabotage your workflow – they destroy accuracy.

When CR2032 batteries weaken, digital angle meters start to "drift." The display fluctuates between 89.7° and 90.3°. You become uncertain.

Then you reach for the analog level. But it doesn’t show exact degrees. You guess. 42 degrees? 43 degrees? You saw – and the boards don’t fit.

Professionals see this all the time: stress-related miscuts. Expensive material waste. Chronic frustration. And in the worst case – €200 worth of wasted walnut wood as firewood.

3 No third hand needed – magnetic base holds rock solid

You know that frustrating moment. You need to measure an angle on the saw blade. But you only have two hands.

One hand holds the measuring tool. The other... what should it do? Stabilize the saw blade? Note down the measurement?

84% of Luminis owners report: the measuring tool stays in place by itself. You don’t have to hold it. The magnetic base attaches directly to the saw blade, steel beams, any metal surface.

Hands-free working. Both hands free for important tasks.

No slipping. No "Can you hold this for a moment?"

4 0.1° accuracy – no guesswork, no "should fit"

Have you ever tried to measure a roof pitch with a level?

The bubble is "somewhere between the lines." You guess: 42 degrees? Maybe 43?

You cut 8 boards based on that estimate. And then... gaps. Gaps everywhere.

With 0.1° digital accuracy, guessing is a thing of the past. The Luminis shows: 42.3°

Not "about 42." But exactly 42.3 degrees.

You set your saw to 42.3°. You cut. The boards fit to the millimeter.

Not by luck. But by precision.

5 Built for the construction site – dust- and water-resistant (IP67)

Most digital tools are fragile. A bit of sawdust or a few raindrops on the terrace and the electronics fail. Not with the Luminis X1.

IP54 certified: it is protected against dust accumulation and splashing water.

Robust casing: it also survives a tough day on the construction site or in a dusty carpentry workshop.

Durability: it’s not a desk toy, but a tool for people who really get the job done.

91% of users say: they are no longer afraid to leave the device open in the workshop. It is sturdy enough for daily use.

6 Double laser for perfect alignment – right the first time

Hanging paintings. A wall with 9 frames. All must hang perfectly straight.

With just basic tools: pencil, level, measuring, erasing, redrawing. 30 minutes later, the first painting is hung.

With Luminis' double laser lines: project the laser on the wall. Align all paintings on the line. Done.

Clean, invisible lines. No pencil marks. No arguments with your partner about "whether it’s straight or not."

The laser lines show the perfect horizontal. Objective. Unambiguous.

7 5-in-1 tool – replaces half of your toolbox

In the past, you needed:

- A digital protractor (for saw settings)
- A spirit level (for horizontal work)
- An inclinometer (for roof slopes)
- A laser level (for alignments)
- A goniometer (for saw blade settings)

That’s 5 separate devices. All of them take up space. All of them have their own batteries (which, of course, all run out at the same time).

The Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Protractor? ✓
Spirit level? ✓
Inclinometer? ✓
Laser level? ✓
Goniometer? ✓

All in one device that fits in your pocket.

You now have two options:

Option 1: You continue as you are now.
With unreadable displays. Dead batteries. Expensive miscuts. You get frustrated every time a project doesn’t turn out the way you envisioned.

Option 2: You invest in a tool that transforms your work.
A tool you want to use every day. That protects your eyes – even in poor lighting conditions. That is always ready to use. That helps you work again with the precision you expect from yourself.

4,9 (1.024)

Luminis X1™ 5-in-1 laser precision tool

Tijdelijke aanbieding

~~€64,99~~ €37,95 ^-30%

Angle meter, level & cross laser in one – accurate results in seconds.

Professional accuracy of 0.1°

Individually tested & pre-calibrated

Double laser on both sides

Most chosen

-30%

Single device

~~€64,95~~

$78.00

-38%

Duo pack

~~€129.90~~

€69,90

-46%

Trio pack

~~€194.97~~

€94,95

In stock: delivery time 4-6 working days

Title

How accurate is the measurement?

The Luminis X1 displays slopes and angles in real-time with an accuracy of 0.1°.

The device can be easily self-calibrated if needed to ensure consistently accurate results.

This way, you can immediately see if everything is perfectly aligned – before anything is screwed or assembled.

What can I use it for?

Ideal for daily use and in the workshop:

Hanging paintings, mounting shelves, aligning furniture, adjusting machines, or preparing woodwork.

Suitable for both DIY enthusiasts and experienced users.

How fast is the delivery?

Shipping within 3-5 business days. We hand over orders to our shipping service within 24 hours.

How does the return process work?

You have 30 days to test the product.

If it doesn't suit you, you can easily return it – risk-free.