Dette 5-i-1-verktøyet gjør vateret ditt overflødig

Presisionsgjennombrudd for håndverkere

Dette 5-i-1-verktøyet gjør vateret ditt overflødig

Snekkere, taktekkere og ambisiøse håndverkere i hele Norge bytter til ett enkelt, individuelt kalibrert presisionsverktøy — i stedet for å slepe på fem separate enheter.

Av Markus Hansen

Håndverk-Redaksjonen · 09. mai 2026

★★★★★ 4,9 · 1.024 anmeldelser

Direct to the offer

1 The end of the "eyeball lottery"

Imagine this: the time is 7:30 PM. You’re working in your workshop. And your measuring instrument... shows clear, green numbers. Perfectly readable.

No flashlight. No reading glasses. No frustration when reading the scale.

The illuminated LCD screen makes this possible.

No strain. No squinting. No relying on the barely visible bubble in your level.

93% of Luminis users report: For the first time in years, measurement values are readable without problems even in poorly lit basements. Many work through the entire project – without searching for their reading glasses even once.

2 No more dead batteries – always ready to use when you need it

No one will tell you this, but here is the truth: Constantly dead batteries not only sabotage your workflow – they destroy precision.

When CR2032 batteries weaken, digital angle gauges start to "drift." The display flickers between 89.7° and 90.3°. You become uncertain.

Then you reach for the analog level. But it doesn’t show exact degrees. You estimate. 42 degrees? 43 degrees? You cut – and the boards don’t fit.

Craftsmen see this all the time: Stress-induced miscuts. Costly material waste. Chronic frustration. And in the worst case – 200 euros of wasted walnut wood as firewood.

3 No more need for a third hand – magnetic base holder is bombproof secure

You know that frustrating moment. You need to measure an angle on the saw blade. But you only have two hands.

One hand holds the measuring instrument. The other... is supposed to do what? Stabilize the saw blade? Note the value?

84% of Luminis owners report: The measuring instrument stands on its own. You don’t need to hold it. The magnetic base attaches directly to the saw blade, steel beams, and all metal surfaces.

Hands-free work. Both hands free for important tasks.

No slipping. No “Can you hold this for a moment?”

4 0.1° accuracy – no more guessing, no more "should fit"

Have you ever tried to measure a roof slope with a spirit level?

The bubble is "somewhere between the lines." You estimate: 42 degrees? Maybe 43?

You cut 8 boards based on this estimate. And then... cracks. Cracks everywhere.

With 0.1° digital accuracy, guessing is over. Luminis shows: 42.3°

Not "about 42." But exactly 42.3 degrees.

You set your saw to 42.3°. You cut. The boards fit to the millimeter.

Not because of luck. But because of precision.

5 Built for the construction site – dust and water protected (IP67)

Most digital tools are vulnerable. A little sawdust or some raindrops on the terrace and the electronics give up. Not with the Luminis X1.

IP54 certified: It is protected against dust deposits and splashing water.

Robust casing: It also survives a tough day on the construction site or in a dusty carpentry workshop.

Long lifespan: It’s not a toy for the desk, but a tool for people who really work hard.

91% of users say: They are no longer afraid to leave the device out in the workshop. It is tough enough for the hard everyday life.

6 Double laser for perfect alignment – on the first try

Hang up pictures. A photo gallery with 9 frames. All must hang perfectly straight.

With regular tools: pencil, level, measuring tape, eraser, redraw. 30 minutes later, the first picture is hung.

With Luminis double laser lines: Project laser on the wall. Adjust all pictures to the line. Done.

Clean, invisible lines. No pencil marks. No arguments with your partner about "whether it's straight or not."

The laser lines show the perfect horizontal. Objectively. Unambiguously.

7 5-in-1 tool – replaces half the toolbox

Previously you needed:

- A digital angle gauge (for saw settings)
- A spirit level (for horizontal work)
- An inclinometer (for roof slopes)
- A laser level (for adjustments)
- A goniometer (for saw blade settings)

That’s 5 separate devices. All take up space. All have their own batteries (which naturally all run out at the same time).

Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Angle gauge? ✓
Spirit level? ✓
Inclinometer? ✓
Laser level? ✓
Goniometer? ✓

All in one device that fits in your pocket.

You now have two options:

Option 1: You continue as before.
With unreadable screens. Dead batteries. Costly errors. You get frustrated every time a project doesn’t turn out the way you imagined.

Option 2: You invest in a tool that changes your work.
A tool you will use every day. That eases your eyes – even in poor lighting conditions. That is always ready to use. That helps you work with the precision you expect from yourself again.

4,9 (1.024)

Luminis X1™ 5-in-1 Laser Precision Tool

Tidsbegrenset tilbud

~~749 kr~~ 429 kr ^-30%

Angle meter, spirit level, and cross laser in one – accurate results in seconds.

Test accuracy of 0.1°

Individually tested and pre-calibrated

Double laser on both sides

Most chosen

-30%

Simple unit

~~749 SEK~~

429 SEK

-38%

Double pack

~~1,499 kr~~

804 SEK

-46%

Triple pack

~~2,249 kr~~

1,092 kr

In stock: delivery time 4–6 business days

Title

How accurate is the measurement?

The Luminis X1 displays inclinations and angles in real time with an accuracy of 0.1°.

The device can be easily calibrated as needed to ensure lasting accurate results.

You can immediately see if everything is precisely aligned – before anything is screwed in or installed.

What can I use it for?

Ideal for typical everyday and workshop uses:

Hanging pictures, installing shelves, adjusting furniture, setting up machines, or preparing woodworking.

Suitable for DIY enthusiasts as well as experienced users.

How fast is the delivery?

Delivery occurs within 3–5 business days. We hand over orders to the shipping provider within 24 hours.

How does the return work?

You have 30 days to test the product.

If it still doesn't fit, you can easily return it – risk-free.