To narzędzie 5-w-1 sprawia, że twoja obecna poziomica staje się zbędna

Przełom precyzyjny dla fachowców

To Narzędzie 5-w-1 Sprawia, Że Twoja Obecna Poziomica Jest Zbędna

Stolarze, dekarze i ambitni majsterkowicze w całej Polsce przechodzą na jedno, indywidualnie kalibrowane narzędzie precyzyjne — zamiast nosić pięć osobnych urządzeń.

Przez Marka Kowalskiego

Redakcja Branżowa · 11 maja 2026

★★★★★ 4,9 · 1 024 opinie

Go to the offer

1 No more "shooting by eye"

Imagine: it's 7:30 PM. You're working in the workshop. And your measuring tool... shows clear, green digits. Perfectly readable.

No flashlight. No reading glasses. No frustration when reading the degrees.

The backlit LCD display makes this possible.

Effortlessly. No squinting. No relying on a barely visible bubble in the level.

93% of Luminis users confirm: for the first time in years, readings are hassle-free even in poorly lit basements. Many complete the entire project without once reaching for their glasses.

2 No more dead batteries – always ready to work when you need it

No one will tell you this, but the truth is: weak batteries not only sabotage your work – they destroy precision.

When CR2032 batteries weaken, digital angle finders start to "drift." The display jumps between 89.7° and 90.3°. You lose confidence.

Then you reach for an analog level. But it won’t show you exact degrees. You estimate. 42°? 43°? You cut – and the boards don’t fit.

Professionals see this all the time: bad cuts due to stress. Expensive material waste. Chronic frustration. And in the worst case – 800 zlotys worth of walnut for firewood.

3 No more need for a third hand – the magnetic holder grips like a rock

You know that frustrating moment. You need to measure the angle on a saw blade. But you only have two hands.

One holds the tool. The other... what should it do? Stabilize the blade? Write down the result?

84% of Luminis owners confirm: the tool holds itself in place. You don’t have to hold it. The magnetic base sticks directly to the saw blade, steel beams, any metal surface.

Hands-free work. Both hands free for what really matters.

No slipping. No "can you hold this for a moment?"

4 0.1° Precision – no more guessing, no more "it should fit"

Have you ever tried to measure the slope of a roof with a regular level?

The bubble is "somewhere between the lines." You estimate: 42°? Maybe 43°?

You cut 8 boards based on that guess. And then... gaps. Gaps everywhere.

With digital precision of 0.1°, guessing is a thing of the past. Luminis shows: 42.3°.

Not "around 42." Exactly 42.3 degrees.

You set the saw to 42.3°. You cut. The boards fit perfectly.

Not by luck. By precision.

5 Built for construction – dust and water resistant (IP54)

Most digital tools are delicate. A bit of sawdust or a few drops of rain on the terrace and the electronics fail. Not the Luminis X1.

IP54 certification: protected against dust accumulation and water splashes.

Sturdy casing: withstands a hard day on the construction site or in a dusty woodworking workshop.

Durability: it’s not a desk toy, but a tool for people who really work with their hands.

91% of users say: they no longer fear leaving the device out in the workshop. It’s tough enough for everyday use.

6 Dual laser for perfect alignment – on the first try

Hanging pictures. A wall with 9 frames. All must hang perfectly straight.

With ordinary tools: pencil, level, measuring, eraser, redrawing. 30 minutes later, the first picture is hung.

With Luminis double laser lines: project the laser onto the wall. Align all the pictures on the line. Done.

Clean, invisible lines. No pencil marks. No arguments with your partner about whether it’s really straight.

Laser lines show the perfect level. Objectively. Without a doubt.

7 5-in-1 tool – replaces half of your toolbox

Once you needed:

- A digital protractor (for saw settings)
- A level (for horizontal work)
- An inclinometer (for roof slopes)
- A laser level (for alignments)
- A goniometer (for blade adjustments)

These were 5 separate devices. All take up space. All have their own batteries (which, of course, run out at the same time).

Luminis X1 replaces all 5.

One device. One USB cable. One investment.

Protractor? ✓
Level? ✓
Inclinometer? ✓
Laser level? ✓
Goniometer? ✓

All in one tool that fits in your pocket.

You now have two options:

Option 1: You continue as you are now.
With unreadable displays. Dead batteries. Expensive wrong cuts. You get frustrated every time a project doesn’t turn out the way you imagined.

Option 2: You invest in a tool that changes your work.
A tool you’ll want to use every day. One that saves your eyes—even in low light. One that is always ready to work. One that lets you work again with the precision you expect from yourself.

4,9 (1.024)

Luminis X1™ 5-in-1 Precision Laser Tool

Oferta Limitowana

~~289 PLN~~ 165 PLN ^-30%

Angle meter, level & cross laser in one – precise results within seconds.

0.1° precision — each device individually calibrated

Double-sided dual laser & magnetic holder

3 measurement functions: angle, percentage, level

Most frequently chosen

-30%

Single device

~~289 PLN~~

$78.00

-38%

Double set

~~578 PLN~~

289 PLN

-46%

Triple set

~~867 PLN~~

397 PLN

Available: Delivery time 4-6 business days

Title

How accurate is the measurement?

The Luminis X1 shows inclinations and angles in real time with an accuracy of up to 0.1°.

If needed, the device can be easily self-calibrated to maintain accuracy for years.

You can immediately see if everything is perfectly level before you screw or install anything.

What can I use it for?

Ideal for everyday use and in the workshop:

hanging pictures, installing shelves, arranging furniture, adjusting machines, or woodworking.

Works well for both DIY enthusiasts and experienced professionals.

How fast is the delivery?

Shipping within 3-5 business days. We hand over orders to our shipping service within 24 hours.

How does the return process work?

You have 30 days to test the product.

If it doesn't suit you, you can return it without any problem – risk-free.