Why the pros stopped guessing
No more guessing — you see the angle straight away
You know the moment. You lay down the spirit level, squint at that tiny bubble and wonder: Is that actually level — or does it just look that way?
You lean in closer. Nudge it a touch. Check again. And still that nagging feeling won't shift: Almost level is never properly level.
That's exactly where the Luminis X1 changes the game. Instead of squinting at a tiny bubble, you read the exact angle straight off the digital display.
No guesswork. No fiddling by feel. No „she'll be right".
The result You get the reading instantly — and crack on with total confidence.
Rechargeable via USB — ready when you need it
You've finally got time for your project. Everything's laid out. You just want to take a quick measurement, press the button — and nothing happens.
Battery flat. So you start rummaging through drawers, toolboxes and old packaging looking for spares. What should've been a quick job turns into an annoying interruption.
With the Luminis X1, things just run smoother. The built-in battery charges easily via USB. No fiddly button cells. No dead battery at the worst possible moment.
Charge. Switch on. Measure. Done.
The result Your tool's ready when you are.
Magnetic base — both hands free
Some measurements look easy — until you actually give them a go. One hand's holding the tool. The other needs to adjust. And on top of that, you're trying to read the value.
Things get wobbly fast. Especially on metal surfaces, saw blades, frames or machinery.
The Luminis X1 sticks straight to any metal surface thanks to its magnetic base. The tool stays put exactly where you need it. The reading stays in view. Your hands stay free.
No slipping. No dodgy workarounds. No need for a second pair of hands.
The result You can set things up more calmly, check more accurately and work a whole lot neater.
0.1° precision — so it actually fits when you're done
Most mistakes don't show up straight away. At first, everything looks square. Only later do you cop it: the edge doesn't close neatly. The cut sits a hair off. The shelf isn't quite level.
And it's exactly those tiny slips that cost you time, materials and patience.
The Luminis X1 shows you the angle digitally to 0.1° accuracy . You don't get a rough guess — you get a clear reading you can actually work with.
The X1 comes pre-calibrated, so you can get stuck in straight away.
The result Measure spot-on, before small slips turn into big headaches.
Built for real work — IP54 rated
A workshop isn't a showroom. There's dust, shavings, the odd splash, and tools that actually cop a workout.
That's exactly what the Luminis X1 is built for. The tough housing sits rock-solid in your hand and is rated IP54 — spot-on for the workshop, garage, building site or jobs around the house.
Because a good measuring tool doesn't just need to be accurate. It needs to work where the work actually happens.
Not for the drawer. For real projects.
The result A tool that keeps up with the daily grind — instead of just looking the part.
Dual laser — see the line before you drill
Getting something straight sounds easy. Until you're trying to line up a few frames, shelves, brackets or marks on one exact line.
You measure. Pencil it in. Adjust. Measure again. And still the same question nags: Is that actually straight?
The Luminis X1's dual laser projects the line right onto the spot you're working on. You can see straight away exactly what to line up against.
Fewer pencil marks. Fewer do-overs. More control.
The result Before you drill, mount or fix anything in place, you already know it's sitting spot-on.
5-in-1 tool — replaces half your toolbox
There was a time when every little measurement meant reaching for a different gadget. A protractor. A spirit level. An inclinometer. A laser level. A goniometer.
Everything lying around somewhere. Everything taking up space. Everything running on its own batteries. And the one you actually need? Never within arm's reach.
The Luminis X1 rolls the lot into one compact tool. You grab a single device and you're sorted for the measurements that actually matter.
- Protractor
- Spirit level
- Inclinometer
- Laser level
- Goniometer
Result Less searching. Less swapping. More jobs done and dusted.
Built like a measuring instrument.
Not like a toy.
✓ Every X1 is individually tested & calibrated before dispatch
What customers are saying
I'm a qualified chippie and I was sceptical at first whether such a compact tool could really be precise enough. It won me over: angles down to a tenth of a degree, and on site it shrugs off dust and knocks without any drama.
I was about to drop a few hundred bucks on one of those big measuring rigs, but honestly I only need it now and then for the home workshop. So far I'm rapt with the purchase — for what I do, it's more than enough.
It sticks straight onto steel beams, so I've got both hands free. On site it's a ripper.
Charging via USB-C is worth its weight in gold. The battery lasts ages and I only need the one cable for everything.
Bought it as a gift, and he's out in the garage using it every single day now. Honestly, should have done it much sooner.
Measures spot-on and sits nicely in the hand. Only downside: the power button is in an awkward spot, takes a bit of getting used to.
Frequently Asked Questions
How accurate is the Luminis X1™?
The X1 measures angles digitally to 0.1° accuracy. Every unit is checked and pre-calibrated before it ships — spot-on the moment you switch it on.
What can I use the X1 for?
Anything that needs to be straight, angled or lined up: shelves, furniture, frames, tiles, saw cuts, pictures on the wall. It replaces your protractor, spirit level, inclinometer, laser level and goniometer.
What's in the box?
The Luminis X1, a USB charging cable and a quick-start guide. Ready to use straight out of the box.
How tough is it?
The housing is IP54 rated against dust and splash water — built for the workshop, the garage and the worksite.
How fast is delivery?
Shipping is free, with delivery usually taking 4 to 6 business days. Tracking details land in your inbox.
How do returns work?
You've got 30 days to send it back. Not happy? Drop us a line — we'll sort the return, no fuss.
Which payment methods can I use?
At checkout you'll find PayPal, credit card (Visa/Mastercard), Apple Pay, Google Pay and Afterpay (pay in 4 instalments).
Do I need to set anything up or install an app?
Nope. The X1 arrives pre-calibrated and ready to go — no app, no setup.
Is it accurate enough for professional work?
For angles, the X1 measures to 0.1° — that covers just about every DIY job and most professional tasks too. If you need top-tier length measurement over long distances, a dedicated system is the better call.
Factory-precise, straight out of the box. Zero risk.
- 30-DayReturns
- 24 MonthsWarranty
- SSLSecure Payment
- 24/7Customer Service